Infrared camera series
VarioCAM ® HD inspect 700

The high-resolution infrared inspection camera of the "upper class" features high megapixels and excellent thermal resolution for razor-sharp infrared recordings. Designed for professional users, this thermographic system provides precise measuring results.

  • Image format: (1,280 x 960) IR pixel with opto-mechanical MicroScan feature
  • Thermal resolution (@ 30 °C): up to 0.02 K*
  • Measurement accuracy: +/- 1 %*

Details about infrared camera

Spectral range

(7,5 ... 14) µm


Uncooled Microbolometer Focal Plane Array

Detector format (IR pixels)

(640 × 480)

Image format with opto-mechanical MicroScan (IR pixels)

(1,280 × 960)

Temperature measuring range

(-40 ... 2,000) °C*

Measurement accuracy

± 1 °C or ± 1 %*

Temperature resolution @ 30 °C

Up to 0.02 K*

Frame rate

Full-frame: 60 Hz (640 × 480), sub-frame formats*: 120 Hz (384 × 288) / 240 Hz (640 × 120)

Window mode*


Storage media

SDHC Card, external control computer for camera control and data acquisition*

Image storage

Time-, trigger- und temperature controlled recording of 16 bit single frames or image sequences with timestamp, video streaming in MPEG format

Realtime storage*

Computer-aided storage of radiometric sequenzes by GigE interface with up to 240 Hz

Lens mount

Bayonet to comfortably switch objectives, automatic objective detection and data transfer


Motor-driven, automatic or manual, accurately adjustable, laser-supported autofocus*

EverSharp function*

Multifocal recording allows for maximum extend of sharp focus


Up to 32x digital, stepless

Digital colour video camera

8 Megapixels, LED video light, vision mixer and cross-fade feature

Dynamic range

16 bit


GigE Vision*, DVI-D (HDMI), C-Video, RS232, USB 2.0, WLAN*, Bluetooth*


2 × digital I/O, 2 × analogue I/O

Tripod adapter

1/4" photo thread

Power supply

Standard Lithium-Ion battery, energy save mode, AC adapter, (12 ... 24) V DC

Integrated microphone and speaker

Voice annotation feature, replay and audio dubbing

Laser range finder*

Semiconductor laser red, laser protection class 2, range up to 70 m

Integrated GPS sensor*

Image integrated storage of position data


5,6" colour TFT display (1,280 × 800) pixel, 170° rotatable and 280° revolvable, daylight suited, incl. flip mirror feature

Colour viewfinder*

Tiltable colour viewfinder with diopter compensation

Grip plate with supporting loop

Gummed, ergonomically shaped grip with padded, individually adaptable hand strap

Grab handle with operating function*

Gummed and ergonomically shaped, with integrated multifunctional button

Single-handed operation

Intuitive operation with ergonomically arranged function keys and multifunctional joystick, programmable keys

Shoulder strap

Shoulder strap made of textile

Storage and operation temperature

(-40 ... 70) °C, (-25 ... 55) °C

Protection degree

IP54, IEC 60529

Impact strength/vibration resistance in operation

25 G (IEC 68 - 2 - 29), 2 G (IEC 68 - 2 - 6)

Dimensions; weight

(210 × 125 × 155) mm; 1,6 kg (basic configuration with standard lens)

Automatic functions

Autofocus, permanent autofocus, automatic distance indicator, distance-dependent display of pixel size to avoid geometrically related measurement errors, autoimage, autolevel, min./max. temperature alarm: visual/acoustic, alarm triggered image storage

Measurement functions

8 free choosable, movable measurement fields/-points, automatic hot/cold spot display: global and internal defined measurement fields, differential temperature measurement, temperature profile, histogram, differential image, isotherms display

Further functions

EverSharp, Camera internal emissivity correction, shutter free operation, use of various colour sets, contrast enhancement, user profile, language selection, user-specific comment data base, digital voice recording

Analysis and evaluation software*

IRBIS ® 3, IRBIS ® 3 report, IRBIS ® 3 view, IRBIS ® 3 plus*, IRBIS ® 3 professional*, IRBIS ® 3 remote HD, IRBIS ® 3 control*, IRBIS ® 3 online*, IRBIS ® 3 process*, IRBIS ® 3 active*, IRBIS ® 3 mosaic*, IRBIS ® 3 vision*, FORNAX 2*, FORNAX 2 plus*



*Depending on model

Application areas for infrared camera

  • Material testing
    Material testing

    Save time and costs by nondestructively testing components with infrared camera systems by InfraTec.

  • Thermal optimization
    Thermal optimization

    Identify possible problems already in the development phase well before serial production.

  • Electronics and electrical engineering
    Electronics and electrical engineering

    Measure temperature distributions of smallest electronic components with infrared camera systems.

  • Thermography in automotive industry
    Automotive industry

    Infrared camera systems help you to secure a high product quality in production and at your suppliers.

  • Thermography in aerospace industry
    Aerospace industry

    Comply with highest security demands by applying state-of-the-art infrared camera systems.

  • Thermography in glass industry
    Glass industry

    Measure correctly temperature distributions behind and on glass by using selected spectral filters.

  • Thermography in plastics industry
    Plastics industry

    Cost-efficiently control die-casting and extrusion processes by means of infrared camera systems.

  • Thermography in chemical industry
    Chemical industry

    Systematically control reactive process heat and display with infrared camera systems of InfraTec.

  • Investigation

    State-of-the-art infrared technology expands the options of the Police´s investigation capabilities via increasing range performance, 24/7 operation options and completely passive technology.

  • Inspection of factory assets
    Inspection of factory assets

    Using infrared cameras and thermography software by InfraTec will make you more efficient and more productive.

  • Electrical installations
    Electrical installations

    Search electrical installations or high-voltage nets with infrared camera systems for dangerous hotspots.

  • Mechanical assembly
    Mechanical components

    Thermography reveals irregularities in heating of mechanical components in time.

  • Inspection of photovoltaic installations
    Inspection of photovoltaic installations

    Take advantage of thermography in order to visualize defects on existing and running photovoltaic installations.

  • Thermography in human medicine
    Human medicine

    Being non-contact and non-invasive thermography is a widely accepted diagostic method.

  • Thermography in veterinary medicine
    Veterinary medicine

    Using thermography quickly make accurate diagnosis in a wide field of illnesses.

  • Building thermography
    Building thermography

    Save money doing thermographic building thermography by using a high performance infrared camera and expert software.

Function of infrared cameras series VarioCAM ® High Definition

Geometric resolution up to 3.1 Megapixels due to an integrated MicroScan feature

The MicroScan technology works opto-mechanical and is designed for permanent operation. Due to  FPA detectors of the latest generation, this technology allows for a quadruplication of IR measurement pixels. They show real temperature values but not interpolated pixels. This opens up several new fields of application. Old measurement tasks become more efficient and therefore, valuable working time and costs are saved. Large-scale or far-flung measurement objects can now be recorded in one, fast, precise and complete recording due to the unique MicroScan technology.

Storage of fast infrared sequences with up to 240 Hz

In case of sudden temperature changes, the infrared camera VarioCAM ® High Definition provides a subframe modus (“subwindowing”) that is usually only found in cooled infrared cameras. The VarioCAM ® HD series allows recording of infrared sequences with frame rates up to 240 Hz. In order to reach such high frame rates, each time a defined section of the detector is being read.

The following frame rates are available:

  • Full-screen with(1,024 x 768) IR pixels: 30 Hz
  • Half-screen with (640 x 480) IR pixels: 60 Hz
  • Quarter-screen with (320 x 240) IR pixels: 120 Hz
  • Subarea with (1,024 x 96) IR pixels: 240 Hz

High-precision calibration of infrared cameras enables for high accuracy of measurements

The infrared camera VarioCAM ® High Definition is calibrated using special algorithms. The specially developed calibration algorithm, with more than just a few calibration curves, is used for compensation of temperature fluctuations. Therefore, highest measuring accuracy and repeatability even at changing environmental temperatures is ensured. The exceptional high measuring accuracy can be reached across a wide temperature range.

Detection of minor defects through high thermal resolution

The thermal resolution describes the process to dissolve slightest temperature differences and thus, can display this measurement value. The infrared cameras of the VarioCAM ® HD series have a high thermal resolution of up to 0.02 K that helps to display even slightest temperature differences with accuracy. In combination with the high-performance lenses this helps to detect critical faults at an early stage and display these in excellent quality.

Comprehensive range of precision interchangeable lenses enables for a wide range of applications

Due to the comprehensive range of lenses for infrared cameras, a wide range of measurement objects is available, starting with micro thermography to telephoto lens applications for objects in a large distance. The optics of the VarioCAM ® HD series were designed as uncompromising full lenses with an opening number of 1.0, highest transmission and transmission quality as well as low distortion.

Combination of various camera functions ensures effective work

The big 5.6" display, the LED light as well as the integrated WLAN and GPS module support the daily usage of the infrared camera VarioCAM ® High Definition for condition analyses of switchgear cabinets, machines, electrical applications and substations. With the focus-free 8 Megapixel digital camera additional visual images for documentary purpose in exceptional high quality can be taken on-site. The thermographic software IRBIS ® 3 report allows an efficient evaluation and documentation of the thermal image taken.

Integrated viewfinder with diopter compensation for unrestricted use under all lightingconditions

In bright sunlight it can be a challenge to generate high-contrast thermal images without reflection.  However, the integrated, pivoted viewfinder with diopter compensation enables the usage of the infrared camera VarioCAM ® High Definition even under difficult lighting conditions. Therefore, unrestricted camera navigation and detailed on-site evaluation works without any problems.

Extensive TFT colour display that is suitable for daylight

The extensive TFT colour display features thermal images in native resolution with high colour depth. With the resolution of (1,280 x 800) pixels all details in the thermal image can be identified reliably. The display fully fits for daylight and can therefore be used to display high quality infrared images even when exposed to sunlight. All important status and measurement information are clearly shown and can be easily read from the display. Thus comfortable navigation is possible. The integrated flip-mirror-function rotates automatically the display view, depending on where the current recording point of the camera is located.

Integrated laser rangefinder for exact detection of object distances

An absolute novelty in the field of portable infrared cameras is the integrated laser  rangefinder, which can exactly detect object distances of up to 70 meters. It is possible to display this additional information with the camera and saved it in the thermal image or retrieve it as necessary. In this way, the user is able to determine the acceptable distance exactly in order to prevent any geometrical measurement mistakes. Furthermore, existing data can be integrated in report templates and individual created calculation rules automatically.

Permanent autofocus for optimal focusing

Constantly changing object scenes require manual or automatic refocusing activated by the user. The integrated permanent autofocus function facilitates this work. In case there is a scene change the camera automatically adopts fast and precise the optimal focusing.

EverSharp function portrays objects in ultra-sharp thermal image quality

With the innovative EverSharp function all objects of the image scene are displayed sharply, not depending on camera distance or  lens. With the help of special algorithms thermal images with different focus positions are combined automatically, so that only the sharp object structures are displayed in the resulting thermal image. Thus thermal images turn out very impressive as all objects are displayed in superb image quality.

Integrated GPS Receiver

Another interesting function for maintenance tasks is the integrated GPS module. This module is able to geographically recognise the measurement location and can automatically locate as well as archive thermal images. It is useful if, for example, a various number of objects located in different places within a big facility have to be measured thermographically at regular intervals.

8 Megaixel digital camera

An integrated, automatically focusing digital camera with a resolution of 8 Megapixel, video function and LED video light for image illumination allows detailed as well as high-contrasted visual digital recordings.

Unrestricted operation of the infrared camera in harsh industrial environments

The robust light metal housing (protection degree IP54*) is ergonomically flexible designed according to  the users needs. It provides reliable protection for the high sensitive optronics of the device. In addition, it guarantees trouble-free operation even in harsh industrial environments and keeps constant the excellent optical and metrological performance parameters of the device over a long service life. The high-resolution, light intensive colour display of the infrared camera is integrated in the light metal housing. In this way a long-term and trouble-free operation of the VarioCAM ® HD is guaranteed. The usage of a high-quality LEMO connector technology ensures a high protection degree of the infrared camera even for computer-based network operations.

Fast and detailed analysis using the integrated IRBIS ® 3 software package

The efficiency of an infrared camera significantly depends on its data analysis software. As a standard, the thermography software package IRBIS ® 3 is included in each camera delivery. This software gives a fast, precise and detailed evaluation of obtained thermograms and sequences. With this, and the copy & paste function in all WINDOWS programmes a good basis is provided for comprehensive development work.

The numerous automatic functions, such as autofocus, automatic image optimisation, automatic hotspot display, automatic calibration range switch etc. enable a fast and effective operation.

The following infrared camera models might also be of interest to you:

Infrared camera VarioCAM ® HD inspect 900
Infrared camera VarioCAM ® HD inspect 800
Infrared camera VarioCAM ® HD inspect 600

*optional, depending on model