Further Characteristics of the Use of Thermography in Electrical Engineering and Electronics

  • Influences neither the RF impedance of the measurement object nor the heat dissipation of the same, which serves the safe avoidance of corresponding measurement errors
  • Allows safe temperature measurement even on live working parts
  • Complete recording of the temperature distribution and its temporal course of complex assemblies
  • Highest spatial resolution by using measurement systems with detectors with a very high number of pixels and opto-mechanical MicroScan unit
  • Resolution of smallest geometrical structures using close up lenses and infrared microscope lenses 
  • Detection of smallest temperature differences using cooled photon detectors and lock-in measurement methods
  • Easy-to-use analysis and documentation of measurement results with powerful analysis software

Infrared Camera Enables Contactless Measurement in Electronics

The thermographic inspection of electronic components and assemblies is an established test procedure for failure detection and quality management – from the development of first prototypes to serial production. This enables, for example, the following to be detected:

  • Hotspots and atypical temperature distributions on the surface of printed circuit boards, integrated circuits and multichip modules
  • Increased contact resistances
  • Increased resistance due to constriction of wires
  • Hidden cracks in joints
  • Power losses due to RF mismatch
  • Incorrect thermal connections of heat sinks
  • Short circuits, soldering defects such as cold solder joints

Thermographic analysis during each development step provides important conclusions for the optimisation of heat management and the design of complex electronic assemblies. In electronics production thermographic temperature measurement is used as a versatile instrument for quality assurance. High-performance thermography has become indispensable for setting critical technological parameters and their permanent monitoring as well as for inline testing of products in the production process and their final functional test.

Advantages when Using Powerful Thermographic Systems

  • Detector resolutions up to (1,920 × 1,536) native IR pixels for testing complex assemblies

  • Capturing of high-resolution detail images with pixel sizes up to < 1 μm using specific microscopic lenses

  • Detection of temperature differences between defective and intact structures in the range of a few micro-Kelvin due to high thermal resolution up to < 0.015 K in combination with the lock-in method

  • Measurement accuracy of up to ± 1 °C or 1 % for accurate measurement results

Precise Localisation and Detailed Mapping of Hotspots and Temperature Differences

The principle of non-contact thermographic temperature measurement allows the error-free determination of the temperature of small objects with small heat capacity. This is often impossible, however, even when using the smallest contacting temperature sensors, as their heat dissipation frequently falsifies the measurement results. In many cases, the use of thermocouples is impossible due to the design or function of the circuit itself. In addition, the structures of electronic measurement objects are sometimes so small that temperature sensors cannot be attached to them.

However, thermographic systems with a high spatial resolution are able to make such small structures clearly visible and, in addition, to determine their exact temperature distribution along with their chronological sequence. By means of specific close-ups and powerful infrared microscopic lenses, users can thermographically measure hotspots of just a few micrometres in size on the surface of components such as semiconductor components. If SIL lenses (Solid Immersion Lenses) are additionally used, even smaller structure sizes can be detected. In combination with appropriate active thermography methods (lock-in thermography), temperature differences of less than 1 mK are clearly visible for failure localisation.

InfraTec offers matching lenses and cameras with cooled and uncooled detectors with native resolutions up to (1,920 × 1,536) IR pixels. With MicroScan – available for cameras with both cooled and uncooled detectors - the spatial resolution can be further improved. The thermograms obtained in this way ensure that components and assemblies are depicted down to the smallest detail and that failures can be precisely detected and localised. Thermal images with an enormous spatial resolution of a few megapixels pay off especially for complex assemblies, where many structures can be captured simultaneously on the respective measurement and test object. If the pixel number of the detector of the used camera is too small, the number of images required for the complete acquisition of the measurement object increases.

Case Study about Thermography in Electronics Applications

Thermography in Process Automation - Isabellenhuette
Further information about thermography in process automation

Thermography in Process Automation

Heat is one of the most important parameters for weal and woe during production processes and for product quality. Therefore, measuring heat has always had major relevance which is reflected by the early use of temperature sensors during the automation of production processes. Now the fast visualization of temperature distributions with non-contacting infrared thermography allows even more complex automated solutions without using contacted temperature sensors.

Inverter with loaded components to forecast their lifecycle - picture credits: @ istock.com / Mordolff
Further information about thermographic microscopy in electronics

Thermographic Microscopy in Electronics

At the same time that the performance of electronic components is being driven ever higher the demand for thermal management at ever smaller scales is also occurring.

Thermography in Electronics Development - Picture credits: © iStock.com / Elhenyo
Usage of infrared thermography at Delphi Deutschland GmbH

Thermography in Electronics Development

At Delphi’s laboratory plant “Test & Validation Services”, thermography is used for design and product validation as part of quality assurance. Therewith, a stable hardware basis is set for integrating new technologies in motor vehicles that again present a substantial contribution to traffic safety.

Get in contact with InfraTec thermography division

Would You Like to Know More?

It is not unusual for tasks to be associated with special requirements. Discuss your specific application needs with our specialists, receive further technical information or learn more about our additional services.


InfraTec GmbH
Infrarotsensorik und Messtechnik
Gostritzer Str. 61 - 63
01217 DresdenDeutschland

Clear Determination of only a Few Milli-Kelvin Temperature Differences

thermal imaging of a circuit board

In general, thermography has now found a firm place in applications within electronics and electrical engineering. Reasons for this include the trend towards ever smaller, but at the same time more powerful components that are operated with ever lower supply voltages. Normally, lower electrical power consumption goes hand in hand with lower temperature changes from which any faults that may occur can be analysed. Infrared cameras with excellent thermal resolutions up to < 20 mK in real-time operation already fundamentally meet these requirements. However, this alone is not sufficient for certain measurement tasks. In addition, lock-in thermography will be required to detect slightest temperature differences. By means of periodic excitation, test objects can be examined non-destructively for defects and irregularities. The measurement time when using the lock-in method increases significantly with the desired resolution compared to a real-time measurement and can take several minutes. Therefore, it is particularly helpful if such measurements can be made "in one go" with a large-format camera providing high geometrical resolution.

A camera with a lower geometrical resolution, in contrast, forces the user to repeat measurements many times during the complete acquisition of the measurement object, especially if a failure cannot always be reliably reproduced. The money saved on purchasing a lower-cost camera then causes the developer to waste a lot of time on testing or production during the final inspection and can result in considerably higher costs.

Excellent Coordination of Infrared Camera, Thermography Software and Peripherals

InfraTec pays special attention to the optimal interaction between the thermographic camera and the software. Regarding the use in electronics manufacturing, the IRBIS® 3 thermography software offers a wide range of functions that support the use of passive and active thermography methods. These include, for example, the comparison between current thermal images and a reference image as well as the display of amplitudes and phase images with adjustable parameters for lock-in thermography. This allows the failure target to be reliably identified and clearly displayed.

Analysis Software of Software Family IRBIS® 3

The IRBIS® 3 also offers a tailored solution for thermographic measurements on printed circuit boards and hybrid assemblies. A great challenge with such measurement objects arises from the abundance of components used. These again consist of a variety of materials, such as different metals, ceramics and plastics, each with very different surface attributes. For precise temperature measurement, the emissivity of the respective material at the surface is of particular importance. With the IRBIS® 3 software the emissivity for each individual pixel can both be determined and adjusted and so the measured temperature can automatically be corrected taking into account the emissivity and any reflected temperature. Various correction models are used for this and for taking into account other influencing factors, too. These models reproduce the respective measurement situation in such a way that all factors influencing the measurement result, such as radiation from the surroundings, windows used or damping properties of the measurement section, are taken into account. This allows the user to always achieve exact temperature measurement results if the relevant conditions are met.

Individual Configuration of Thermographic Systems for Electronics and Electrical Engineering

Depending on the respective task, users can get the equipment configured meeting their specific needs. The starting point will usually be the thermographic camera. Cooled or uncooled detector? Which detector format? Shall the thermographic system support lock-in thermography? How much flexibility is desired for the distance between the measurement object and the camera? What influence does this have on the choice of microscopic lenses and close-ups? Depending on what the answers to these questions will be, InfraTec can offer thermographic systems of various performance levels - from the individual camera to the automated modular E-LIT test bench.

Infrared camera VarioCAM HDx from InfraTec

VarioCAM® HDx Lock-in

The hand-held VarioCAM® HDx Lock-In is extremely versatile. In addition to its use for Lock-in Thermography, it can also be used for predictive maintenance, for example.

Infrared camera VarioCAM HDx head from InfraTec

VarioCAM® HDx head Lock-in

The compact dimensions and low weight are among the advantages of the VarioCAM® HDx head lock-in. If the task is accompanied by a constant measurement scenario in an industrial environment, it is the first choice.

Automated Testing Solution ACTIVE-LIT - Header - Picture Credits: © iStock.com / scorpp

Electronic / Semiconductor Testing - E-LIT

Detect inhomogeneous temperature distribution and local power loss during the production using the Lock-in thermography.

Associated Industries & Applications

  • Active Thermography - Picture Credits: © Rainer / Fotolia.com
    Active Thermography

    Active Thermography

    Make use of active thermography for non-destructive and contact-free material testing, for both automated inline and offline solutions.

  • microthermography


    Micro-thermography allows for the thermal analysis of extremely small structures in the micrometer range, providing a detailed representation of the temperature distribution on complex electronic assemblies and components.

  • thermal imaging to inspect electrical installations
    Inspection of Electrical Installations

    Inspection of Electrical Installations

    Search electrical installations or high-voltage nets with infrared camera systems for dangerous hotspots.

Infrared Cameras for Electronics and Electrical Industry