Infrared camera ImageIR® 5300 Series from InfraTec
  • Measurement Accuracy

    Precise and highly repeatable measurements 

  • Thermal Resolution

    Precise detection of smallest temperature differences

  • Frame Rate

    Analysis of high-speed dynamic temperature changes and processes

  • Spectral Thermography

    Master most sophisticated measurement tasks, e.g. on highly emissive or transmissive spectral ranges or through glass

  • Protection Degree

    Constant excellent optical and metrological performance even in harsh industrial environments

Control Your Infrared Camera or Your Processes

You can include a trigger interface in your infrared camera of the ImageIR® 5300 series which allows to clock external processes or devices with the frequency of the camera or vice versa. Thereby a synchronous operation is guaranteed, e.g. of various measurement devices. As the infrared camera systems of the ImageIR® 5300 series come with a snapshot detector it is also possible to trigger the acquisition of thermal images by an external clock. Both trigger directions are optimally supported by the products of the thermographic software family IRBIS® 3 which also takes care of an easy handling of the settings.

Acquire Thermal Images in a Millisecond Time

The exact and fast control of the detectors of the ImageIR® 5300 infrared camera series provides the possibility to acquire and analyse thermal images at a time scale of milliseconds. Thereby it allows an easy analysis of fast processes regarding their thermal changes. Thermal images can be stored at a frame rate of up to 12 kHz and provide insights into thermal changes of fast running processes.

Easily Transfer Your Radiometric Data to the Computer

You will be able to work with both radiation proportional data formats and also directly with temperature data in °C or °F. You will receive the data by setting your specific parameters in the easy handling acquisition interface of the  ImageIR® 5300 series at a frame rate of up to 12 kHz. 

Measure Correctly with an Accuracy of +/- 1%

If your measurement object has a temperature of 18.7 °C you will always measure 18.7 °C and exactly this is taken care of by the infrared camera systems of the ImageIR® 5300 series. You can rely on a correct thermographic measurement with an accuracy of +/- 1%

Rotating aperture wheel and filter wheel for infrared camera

Play

Make Use of Spectral Filters for Material Specific Measurements

Material specific emissivity and transmissivity properties have to be taken into account while measuring with infrared camera systems. The integration of spectral filters makes use of those specifics for special measurements. For example, spectral ranges of thin PE foils can be excluded in case they are highly transmissive – to say transparent. Like this only the radiation will be measured which is purely emitted by the foil itself. Based on its long experience in thermography InfraTec can support you in selecting the right spectral filter. The infrared camera systems of the ImageIR® series can integrate a remotely controllable filter wheel which can hold up to four spectral filters. The filter position close to the detector can avoid warm aperture effects and allows for the usage of smaller and thereby cheaper filters in the infrared camera.

Extend Your Temperature Measurement Range with an Automatic Aperture Setting

The temperature measurement range of the ImageIR® infrared camera series can be widened by an integrated aperture wheel. The motorized aperture wheel can be controlled by the camera control itself. Working with calibrated measurement ranges the appropriate aperture will even be automatically set in the infrared camera. When filter and aperture wheels are separately integrated ImageIR® camera series will be especially flexible in handling specific measurement situations.

  • Detect Smallest Temperature Differences Using High Thermal Resolution of 20 mK

    The thermal resolution of the ImageIR® infrared camera series allows you to measure smallest temperature differences of Better than 0.02 K (at 30 °C). Thermal images with a narrow temperature span display details absolutely sharp. You will find interesting signatures even there where other infrared camera systems cannot detect any temperature differences any longer.

  • Highest Homogeneity will Provide You with a Brilliant Picture

    A infrared camera out of the ImageIR® 5300 series offers highest homogeneity by combining cooled detector technology of the latest generation with other high precision components. Precise measurements therefore will not be influenced by any fixed pattern and thermal images will be absolutely clear.

  • Take Advantage of the Modular Concept for Your Flexibility

    The closed, industrial-suited, high-strength aluminium alloy housing is very compact and protects the sensitive sensors and electronics even during roughest applications. It impresses with its low weight. The modular design allows for an application-specific configuration and later adaptation to varying demands. The interfaces are equipped with push-on connectors to uphold the degree of protection.

Get in contact with InfraTec thermography division

Would You Like to Know More?

It is not unusual for tasks to be associated with special requirements. Discuss your specific application needs with our specialists, receive further technical information or learn more about our additional services.

Luxembourg

InfraTec GmbH
Infrarotsensorik und Messtechnik
Gostritzer Str. 61 - 63
01217 DresdenDeutschland

Technical Specifications of ImageIR® 5300 Series

Spectral range (2.0 … 5.7) µm
Pitch 30 µm
Detector MCT or InSb
Detector format (320 × 256)
Readout mode ITR
Aperture f/3.0 or f/2.0
Detector cooling Stirling cooler
Temperature measuring range (-40 … 1,500) °C, up to 3,000 °C*
Measurement accuracy ± 1 °C or ± 1 %
Temperature resolution @ 30 °C Up to 0.015 K
Frame rate Up to 450 / 1,500 / 4,500 / 25,000 Hz / 12,960 Hz in line scan mode
Window mode Yes
Focus Manual, motorised or automatically*
Dynamic range Up to 16 bit*
Integration time (1 … 20,000) µs
Rotating aperture wheel * Up to 5 positions
Rotating filter wheel * Up to 5 positions
Interfaces GigE | CAMLink* | HDMI*
Trigger 3 IN / 2 OUT, TTL
Analog signals*, IRIG-B* 1 IN, no
Tripod adapter 1/4" and 3/8" photo thread, 2 × M5
Power supply 24 V DC, wide-range power supply (100 … 240) V AC
Storage and operation temperature (-40 … 70) °C, (-20 … 50) °C
Protection degree IP54, IEC 60529
Impact strength/vibration resistance in operation 2 G, IEC 68-2-29/26
Dimensions; weight (244 × 120 × 160) mm*; 3.3 kg (without lens)
Further functions High-speed mode*, Multi Integration Time*
Analysis and evaluation software* IRBIS® 3, IRBIS® 3 view, IRBIS® 3 rotate, IRBIS® 3 plus*, IRBIS® 3 professional*, IRBIS® 3 control*, IRBIS® 3 online*, IRBIS® 3 process*, IRBIS® 3 active*, IRBIS® 3 mosaic*, IRBIS® 3 vision*
Depending on model
Dimensions of the ImageIR

Field of View Calculator

Check the geometrical resolution of our infrared cameras for your application.

Each measurement or testing task has its own characteristic basic conditions. For getting optimal results camera, detector and lens have to be perfectly matched to one another. The field of view calculator helps you to determine the appropriate combination.

Field of View Calculator of the ImageIR®

Case Study of ImageIR® 5300

Test of Laser Welds with ImageIR® from InfraTec

Test of Laser Welds

Non-destructive testing methods are becoming increasingly more important in the industry. One reason is that they cost much less than other test methods. As a very elegant method, the active heat flow thermography method is now firmly established as a powerful method of non-contact and non-destructive testing of products of different manufacturing technologies.

Software

Comprehensive Thermography Evaluation Software for Efficient Operation

The software family IRBIS® 3, which was developed by InfraTec, is part of a complete system of the camera series ImageIR®. The comfortable and professional thermography software IRBIS® 3 professional offers a wide range of analysis- and editing tools to analyse sophisticated thermal investigations. The combination of ImageIR® together with the professional thermographic software meets all requirements that are set as standard for efficient high-performance tools for thermographic investigations.

Analysis Software of Software Family IRBIS® 3
Get in contact with InfraTec service

Do You Want to Know More About the InfraTec Service?

Our experienced service team will be happy to assist you.

Luxembourg

InfraTec GmbH
Infrarotsensorik und Messtechnik
Gostritzer Str. 61 - 63
01217 DresdenDeutschland

Industries & Applications for this Infrared Camera

  • Active Thermography - Picture Credits: © Rainer / Fotolia.com
    Active Thermography

    Active Thermography

    Make use of active thermography for non-destructive and contact-free material testing, for both automated inline and offline solutions.

  • thermography for aerial photography
    Aerial Thermography

    Aerial Thermography

    Detect persons and objects in the field or monitor wide-area geologic properties or environmental damages.

  • thermography in aviation
    Aerospace Industry

    Aerospace Industry

    Comply with highest security demands by applying state-of-the-art infrared camera systems.

  • thermography for automotive applications
    Automotive Industry

    Automotive Industry

    Infrared camera systems help you to secure a high product quality in production and at your suppliers.

    Show further industries & applications

Choose Your Infrared Camera

Choose from more than 30 infrared camera models. Our product range includes entry-level cameras, professional cameras as well as universal cameras, high-end and industrial systems.

Overview of all infrared camera models
Camera filter for infrared cameras

*optional, depending on model